Schedule Service

 

 

Just how do you actually feel on the subject of How to Install a Bathtub?

Installing a bath tub isn't specifically brain surgery, yet it does need solid plumbing, carpentry, and often, tiling abilities. Changing an old bath tub with a brand-new one is additionally a moderately hard job. If the old tub is readily accessible, the task can relocate rapidly; if you have to open up a wall to remove the old tub and also position the new tub, the task is much harder. In either case, the job is within a house handyman's abilities, although you will certainly need an assistant to leave the old tub and also embeded in the new one. Make certain you have qualified yourself for the job and are comfortable trying it. Instead of hiring a contractor to take control of a halfway-completed job, it is better to take into consideration utilizing one before you start. Chances are you might need a specialist plumber to make tube connections.
This article will certainly aid you install a brand-new tub in your restroom if you have currently gotten a new bathtub as well as don't require to alter the arrangement of your previous water supply pipelines.
Your tools and product checklist should consist of the following:

 

• New Tub


• Hammer


• Pipeline Wrenches


• Prybar


• Shatterproof glass


• Level


• Pliers


• Flexible Wrench


• Putty Knife


• Screwdriver


• Cold Chisel


• Measuring tape


• Pipe Caps


 

Planning for the Setup

Firstly, the sustaining frame provided with the bathroom needs to be fitted (if required) according to the maker's instructions. Next off, fit the faucets or mixer to the bathtub. When suitable the tap block, it is very important to see to it that if the tap includes a plastic washing machine, it is fitted in between the bath and also the taps. On a plastic bathroom, it is also reasonable to fit a supporting plate under the faucets unit to avoid strain on the tub.
Fit the flexible faucet adapters to the bottom of the two faucets using 2 nuts and also olives (sometimes provided with the tub). Fit the plug-hole outlet by smearing mastic filler round the sink electrical outlet hole, and afterwards pass the outlet with the hole in the bath. Use the nut supplied by the maker to fit the plug-hole. Check out the plug-hole outlet for an inlet on the side for the overflow pipe.
Next off, fit completion of the flexible overflow pipe to the overflow electrical outlet. Afterwards, screw the pipeline to the overflow face which should be fitted inside the bathroom. Ensure you utilize every one of the supplied washing machines.
Attach the trap to the bottom of the waste outlet on the bath tub by winding the thread of the waste outlet with silicone mastic or PTFE tape, as well as screw on the catch to the outlet. Link all-time low of the overflow tube in a similar manner.The bath must currently be ready to be fitted in its last placement.

 

 

Removing Old Taps

If you need to change old faucets with brand-new ones as a part of your installation, then the first thing you must do is separate the supply of water. After doing so, switch on the faucets to drain pipes any water remaining in the system. The procedure of getting rid of the existing faucets can be quite problematic due to the restricted access that is typically the situation.
Utilize a container wrench (crowsfoot spanner) or a faucet tool to undo the nut that connects the supply pipelines to the faucets. Have a towel prepared for the staying water that will certainly originate from the pipelines. As soon as the supply pipelines have actually been removed, use the same tool to loosen the nut that holds the taps onto the bath/basin. You will certainly need to stop the single faucets from transforming throughout this procedure. When the taps have been removed, the holes in the bath/basin will have to be cleansed of any type of old sealing compound.
Before going on to fit the brand-new faucets, contrast the pipe connections on the old taps to the brand-new faucets. If the old faucets are longer than the new faucets, after that a shank adapter is required for the new taps to fit.

 

 

Installing the Bath tub

Making use of the two wooden boards under its feet, place the bath tub in the called for setting. The wooden boards are useful in evenly spreading out the weight of the bath tub over the location of the boards as opposed to focusing all the weight onto four small factors.
The following goal is to ensure that the bath tub is leveled all round. This can be accomplished by checking the level as well as changing the feet on the tub until the spirit level reviews degree.
To set up taps, fit the bottom of the furthest adaptable faucet port to the suitable supply pipe by making a compression sign up with; after that do the exact same for the other tap.
Activate the water as well as inspect all joints and brand-new pipework for leakages as well as tighten them if necessary. Load the bathtub as well as likewise check the overflow electrical outlet as well as the normal electrical outlet for leaks.
Ultimately, repair the bathroom paneling as described in the supplier's user's manual. Tiling as well as sealing around the bathtub should wait till the bath tub has been used at least when as this will certainly settle it into its last setting.

 

 

Fitting New Touches

If the tails of the brand-new taps are plastic, after that you will require a plastic port to prevent damages to the thread. One end of the connector fits on the plastic tail of the faucet and the various other end offers a connection to the existing supply pipes.
If you require to fit a monobloc, then you will certainly need reducing couplers, which attaches the 10mm pipe of the monobloc to the typical 15mm supply pipeline.
Next off, position the faucet in the mounting opening in the bath/basin guaranteeing that the washing machines remain in location in between the tap and also the sink. Protect the faucet in place with the supplier supplied backnut. As soon as the tap is firmly in place, the supply pipelines can be connected to the tails of the faucets. The taps can either be linked by utilizing corrugated copper piping or with typical faucet connectors. The previous type must be connected to the tap finishes first, tightening up only by hand. The supply pipelines can later on be connected to the various other end. Tighten both ends with a spanner after both ends have actually been attached.

 

 

Tiling Around the Tub

In the location where the bath satisfies the floor tile, it is required to secure the accompanies a silicone rubber caulking. This is very important as the fitting can move sufficient to crack a stiff seal, creating the water to penetrate the wall between the bathroom and also the tiling, leading to problems with moisture and also feasible leaks to the ceiling below.
You can select from a range of coloured sealers to blend in your components and also fittings. They are sold in tubes as well as cartridges, and also can sealing spaces approximately a size of 3mm (1/8 inch). If you have a larger space to fill up, you can load it with spins of drenched paper or soft rope. Remember to always fill the bathtub with water before sealing, to enable the motion experienced when the bathtub remains in usage. The sealer can split relatively early if you do not take into consideration this activity prior to securing.
Conversely, ceramic coving or quadrant ceramic tiles can be utilized to border the bath or shower tray. Plastic strips of coving, which are easy to use and cut to dimension, are additionally conveniently readily available on the marketplace. It is suggested to fit the floor tiles making use of waterproof or water-proof glue and also cement.

 

A Step-by-Step Guide to Installing a Bathtub

 

Is your bathtub looking a bit dated lately? Believe it or not, installing a new one is a project you can do yourself. Whether your bathtub is broken or doesn’t fit in with your current bathroom’s design, you can fix it without having to hire a contractor or paying labour costs.

But, beyond saving money, there are other benefits of installing your own bathtub. When you do this project yourself, you can customise every step of the process. You can also make sure the finished product looks exactly the way you want it to.

This DIY project is quite involved, but by doing some research, preparing your bathroom and using the right equipment, it is definitely one you can take on. This guide will help you understand the technical procedures behind installing a new bathtub.

 

Remove the Existing Bathtub

 

To remove the old bathtub, you will need to turn the water supply off before you start any work. After you turn the water off, there will likely still be some water left in your plumbing system, which you can remove by turning on a faucet below the level of the bathtub. Once the water stops running, you are ready to start working.

The easiest way to remove the tub is to remove the faucet, handles and other piping and then pull the tub out from the wall. If this doesn’t work in your situation, you will need to remove part of the wall, remove the piping and then slide the tub out.

 

Choose the Right Bathtub

 

The ideal way to replace your bathtub is to find one that has the exact dimensions and has the drain and faucet on the same side as your old one. This way, it will fit in the same place and you won’t have to change the piping system in your bathroom. Choose a tub that matches your home’s decor and fits with the style of the bathroom.

 

Install the Plumbing and Ledger Board

 

You can purchase a tub drain kit at a hardware store which will have all the pieces you will need for your new tub’s plumbing. Follow the instructions that came with the kit to install the plumbing in the new tub and then take measurements to make sure the plumbing in the tub will align with the plumbing in your bathroom. If it doesn’t, now is the time to make necessary adjustments.

Some bathtubs need a ledger board that is installed on the wall behind the tub to help support it. If your new bathtub requires one, the directions that came with it will tell you how high it should be installed. If your old bathtub had a ledger board, and it is still in good condition, you can adjust its height to match the new bathtub.

 

Install the Bathtub

 

When the plumbing and ledger board are ready, you can install the new bathtub. Carefully lower it into the space, being careful not to damage the tub, wall, plumbing or ledger board. Since bathtubs are very heavy and you will need to line the tub up exactly, it is wise to have someone help you with this step.

Once the tub is in place, it needs to be perfectly level, so use a bubble level instead of estimating how level the tub is. Put the level on the top edge of the tub, not the bottom on the inside, since many tubs are designed with a sloped bottom.

If the bathtub isn’t level, adjust the ledger board and shift the tub until it is. When it is level, use screws to attach the tub to the wall studs. Most bathtubs have pre-drilled holes in the upper flange, so use these but do not over tighten the screws.

 

Hook up the Plumbing

 

Now that the bathtub is installed, it needs to be attached to your plumbing system. First, install the shoe fitting under the tub and drain pipe, then the overflow pipe and then the drain flange. Your tub plumbing kit will include specific instructions on how to install these pieces.

 

Install the Bathtub Surround

 

A bathtub surround will protect the walls around the tub from water damage and can give your new bathtub a more finished look. To install one, make sure the wall is completely clean and dry so that the adhesive will be able to hold the surround securely. Then, measure the surround and mark the same dimensions on the wall above the tub.

Following the directions that came with the surround adhesive, apply it to the wall. Press the surround against the wall on top of the adhesive and then pull it away for about three minutes to activate the adhesive, then apply the surround again. Keep in mind that this is the most common way to use an adhesive, but you should check the instructions on the package for any special steps.

If there is any excessive adhesive around the sides of the surround, you can use mineral spirits to remove it. Then use masking tape to hold the surround panels in place until the adhesive is dry. Using silicone, seal all the cracks between the surround panels and the gap between the bottom of the panels and the top of the bathtub.

If you want to install tile above your bathtub, instead of a bathtub surround, the process will be very similar. But, you will need to measure and cut tiles and install each one individually, using tile spacers to make sure they are evenly spaced. You will then use grout to fill in the spaces between the tiles.

https://www.hss.com/blog/bathroom/a-step-by-step-guide-to-installing-a-bathtub/

 

As a serious reader on A Step-by-Step Guide to Installing a Bathtub, I assumed sharing that article was a good thing. Enjoyed our blog posting? Please share it. Help other people locate it. I am grateful for your time. Kindly check up our site back soon.

Book Inspection

This Resource










All house owners who reside in warm climates have to perform their greatest to winterize their water pipes. Failing to do thus can lead to disaster like icy, fractured, or ruptured pipes.

Switch on the Faucets

When the temperature level drops and also it seems to be as if the frigid temperature will last, it will certainly aid to transform on your water both indoors and also outdoors. This are going to always keep the water streaming by means of your plumbing devices. You'll finish up wasting gallons of water this method.

Open Up Cabinetry Doors Hiding Plumbing System

When it is actually chilly outside, it would be handy to open up closet doors that are actually concealing your pipes. Doing this little secret can keep your pipelines warm and comfortable as well as confine the possibly dangerous outcomes of freezing temperature levels.

Require Time to Wrap Exposed Pipes

One great as well as effortless hack to warm up frigid water pipes is to cover them along with cozy towels. You can additionally utilize pre-soaked towels in hot water, simply don't overlook to use preventive gloves to secure your palms from the heat.

Make An Effort a Hair Clothes Dryer or Heat Weapon

When your water pipes are almost freezing, your trustworthy hair clothes dryer or heat energy weapon is actually a blessing. Bowling scorching sky straight in to them might assist if the scorching towels do not assist dislodge any sort of resolving ice in your pipes. Do certainly not make use of various other things that produce straight blazes like a blow torch. This can easily result in a larger calamity that you can easily not handle. You might find yourself damaging your pipelines while trying to thaw the ice. As well as in the future, you may even end up burning your home. Thus be mindful!

When Pipelines are Frozen, shut Off Water

If you see that your water pipes are entirely icy or even practically nearing that stage, switch off the main water valve quickly. You are going to commonly locate this in your cellar or mud room near the heating system or the front wall structure closest to the street. Switch it off today to stop further damages.

Don't neglect to shut external water resources, also, such as your connection for the garden residence. Doing this are going to avoid extra water from filling out your pipes unit. Regrettably, with additional water, even more ice will certainly accumulate, which are going to inevitably bring about rupture water pipes. It is actually better to get in touch with a professional plumbing technician for an evaluation if you are unsure concerning the state of your water pipes this wintertime. Taking this proactive approach can save you hundreds of dollars in repairs.


Performing this small trick may maintain your pipelines warm and also limit the likely risky end results of freezing temps.

One effortless and nifty hack to heat up frigid water pipes is actually to cover all of them with hot towels. If the warm towels carry out certainly not aid force out any kind of settling ice in your pipelines, bowling scorching air directly into all of them might assist. Transform off the primary water valve instantly if you observe that your pipes are entirely frosted or even virtually nearing that stage. Along with even more water, more ice is going to pile up, which will at some point lead to break pipelines.

 

Fixing a Icy Pipeline

In only a concern of a months winter months will be actually upon our company. Packing up from the shoveling and cool snow, homeowners occasionally possess to deal along with the added duty of taking care of icy pipelines.
Protection is actually the very best Medicine
The absolute best means to deal with frosted pipelines is actually to prevent all of them in the 1st location. I have actually found even protected pipes in outdoors walls ice up.
If, having said that, you possess an existing home and there are plumbing supply pipes working on the outside walls that you possess access to, after that insulate these water pipes with pipe insulation. It is better than nothing.
How to Take Care Of a Frosted Pipeline
If in the event you do find yourself with a frosted water pipes, then I encourage the following:
• Shut the source line valve and open the tap at the end of the water pipes.
• Check out the whole entire size of pipe trying to find cracks, gaps or splits , particularly focusing on the suspect cool places, e.g. crawl spaces and also outside wall surfaces.
Melt Out the Damaged Water pipes
• Once the break, split or hole has been pinpointed, make use of a hair clothes dryer to warm the encompassing pipeline region to receive the water circulating once again via the pipe. Inspect the tap consistently to observe when the water begins to stream once more. When the water begins to stream it is actually time to carry on to the mending phase.
Keep in mind: The volume of water draining of the faucet will definitely be limited as the source line shutoff was actually shut off.
Restoring the Damages Supply Pipe
• Once the wrecked water pipes place has been defrosted out, using a hack saw or even pipeline cutter machine, clear away a section of pipe that includes the broken section.
• Replace this area of water pipes. Make use of a gas light, solder and motion to perspire the new joints.
• If you are actually not relaxed reducing and also changing the damaged pipeline, pending the size of the fracture or damage you could simply wrap ductwork strip or electric tape around the affected area for a short-term fix. However, a plumber needs to be actually brought in asap to correct the crack permanently.
• Once the pipe has actually been actually fixed, switch the supply line valve back on, function the faucet and also inspect the mended web site for any sort of water leaks.
• Ultimately, use some pipe protection and/or electric pipe-heating cord around the fixed location to prevent the trouble coming from occurring again.


The absolute best way to handle with icy water pipes is to prevent all of them in the very first spot. If you possess the deluxe of managing the structure and/or getting involved of your residence, create certain the plumber does certainly not run any type of pipes source lines in the outside walls of the property. I have seen even shielded pipelines in outside wall surfaces ice up.
• Once the gap, fracture or break has been recognized, make use of a hair clothing dryer to warm up the encompassing water pipes place to obtain the water moving once again with the pipe. The moment the water begins to flow it is actually opportunity to move on to the fixing period.



Book With Us Today!

Contact Us Now

 

Right here below you might get more outstanding content related to How to Install a Freestand.

An effective shower setup requires cautious preparation and also a great deal of work. In many cases, you will certainly need to do three kinds of tasks: mounting wall surfaces, mounting the plumbing, as well as completing walls.

 

 

Various Types of Shower Units

 

• Push-on Mixer: The tube and also spray parts of the push-on mixer shower device can be linked to the bath tap based on your need, and also the water temperature level can be adjusted using the faucets. Push-on mixers are cheap as well as incredibly easy to install. Nonetheless, although the pipe connection is straightforward, it is quickly dislodged. Furthermore, it is inconvenient to readjust the temperature level.


• Bath/Shower Mixer: The pipe and spray of this kind of shower are integrated with a bathroom mixer tap, and the temperature level can be changed via the bath faucets. It is an extremely economical alternative and no added plumbing is entailed. Nevertheless, the bath/shower mixers likewise struggle with troublesome temperature level control alternatives.


• Handbook Mixer: The hose as well as spray of a manual mixer shower device are a part of the wall surface unit and also the hot and cold water products are linked to a single shutoff The temperature as well as pressure of the water are managed through either one or a range of knobs (in much more costly showers). Although temperature level control is much easier in hands-on mixer kinds, they are much more pricey than the previously discussed mixers. They additionally require extra plumbing of cold and hot supply of water pipelines.


• Thermostatic Mixer: The tube and spray of this shower kind belong of the wall surface unit as well as the cold and hot water supplies are linked to a solitary valve right here as well. It is full with a built-in stabiliser to self-adjust the water temperature level as well as to avoid it from coming to be as well warm. Among the biggest advantages of a thermostatic mixer shower kind consists of convenient temperature control. Nevertheless, it is one of the most expensive of the different mixer choices.


• Power Shower: A power shower is a solitary device having an effective electric pump that is capable of changing both the water stress and also temperature. This kind of shower can be fitted if there is water system from a cold water cistern and also a warm water cylinder. A power shower makes the modification of both pressure and also temperature easy. On the other hand, it disagrees for water warmed directly by the shower or where the water is provided by a mix central heating boiler under keys pressure.


• Electric Shower: An electric shower is plumbed into a mains cold water supply and also it warms the water electrically. It is important to note that for this shower type to be installed, the mains pressure needs to be at least 0.7 kg/sq cm (10lb/sq in). The unit allows the temperature and stress to be readjusted using a handle. Versions with temperature level stabilisers are much better as they continue to be untouched by various other taps elsewhere in use within the house. A major downside of electrical showers is that the control handle just allows for the option of heats at much less stress, or lower temperatures at a higher pressure. This is problematic in the winter when the spray is frequently weak and also the mains water is colder. Nevertheless, this problem is tackled in some versions which are readily available with a winter/summer setting.


 

Many Common Errors

 

• Breaking or neglecting local code restrictions.


• Using pipelines that are also small.


• Affixing copper to galvanized without utilizing a brass or dielectric fitting between both.


• Not utilizing tape or pipe substance at threaded joints.


• Uneven your components when installing them.


• Not mounting an air space filling for components.


• Cutting supply stub outs too brief to set up the shutoff valves onto after the ended up wall surface is in area.


• Not correctly aligning tubes into installations or stop shutoffs. (Requiring the nut onto the compression ring at an angle when the tubes is at an angle will certainly trigger a leakage.).


• When turning the water back on in your house, always run the outdoors hose pipe shutoff or flush your bathrooms to bleed dust and air from the lines. This debris can cause problems in your sink taps and various other plumbing trim.


 

Prep work.

First of all, you have to choose the sort of shower that you want to mount. It is very important to identify whether the chosen shower can coping with certain systems and also can regulate a risk-free degree of water through the central heating boiler. The majority of shower units nowadays are created to be versatile to various water stress (such as stored warm water and also cold keys).
It is also vital to take into account the water pressure as well as the preparation of the piping and drain for the shower.

 

 

Approach.

Depending on the type of shower you want to mount, the shower head must either be suited order to avoid its contact with the water in the bath listed below or the base tray, or it has to have a check valve.
Prior to starting, it is advisable to mark the positions of the shower head as well as control, as well as to intend the pipe-work entailed. Additionally, the drain system to eliminate the drainage will need to be prepared. Both settings of the cord path and also the shower button will certainly additionally require to be taken into consideration if an instantaneous or electric shower system is being set up.
Utilize the direction overview supplied with the shower device to fit the shower control.Before suitable the pipes that will supply the water to the shower system, it is important to cut off the supply of water. In order to safeguard the pipes, they ought to be given a waterproof covering as well as additionally fitted with separating shutoffs. The pipelines can then be buried into the wall and plastered over to neaten the overall look.
Fit the base tray, shower head, as well as fittings.
Connect the main shower control to the pipelines that will certainly be providing the water (This might need a female screw thread adapter).
Reconnect the water as well as test the pipelines for any kind of leaks, as some may require tightening.
If you are installing an electric shower, keep in mind to turn off the electrical energy supply prior to making any kind of electric connections. Once these links have actually been made (there ought to be assistance within the instruction manual), the power supply can be changed back on.

 

 

Adjusting Water Stress to Suit Your Shower.

The cold water storage tank can be raised to a greater elevation (occasionally as low as 150mm (6inches)) by installation a solid wooden assistance below it - potentially made up of struts and also blockboards. If you pick this alternative, the major and circulation pipes will certainly also need to be increased to meet the brand-new height of the storage tank.
Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is selected, it needs to be connected right into the power supply in order to run.

 

 

Piping as well as Drainage.

It is best to utilize 15mm size supply pipes, and also make the runs to the shower as short and straight as feasible so regarding maintain optimal pressure as well as minimise warm loss. Additionally, by reducing the use of elbow joints for pipeline corners, you can reduce the resistance in the flow of the water system. You can attain this by bending the pipelines instead.

 

Shower enclosures for bathrooms

 

It makes your bathroom look like a luxury suite:

 

Installing a new shower cubicle in your bathroom is an excellent way to make it look like a luxury suite. Nothing says modern elegance like a glass shower enclosure. Made with 8 mm easy clean glass, Jauqar shower enclosures come in varied colors and sizes to fit perfectly with your existing bathroom size & decor. The high-quality enclosures come with concealed fixings and silent cushion closing to ensure a great showering experience.

 

Adds style to your bathroom:

 

Shower cubicles are one of those shower products that can make your bathroom look modern, wide, and visually appealing. Jaquar shower enclosures are available in various styles, so you can find the one that fits your bathroom's overall design. Whether you prefer rectangular enclosures or fancy curved designs, Jaquar has it all.

 

Enhances Personal Hygiene:

 

Waking up in the morning to a filthy, muddy bathroom can ruin your day. Jaquar shower enclosure helps keep your bathroom clean and hygienic. A shower enclosure helps keep the water inside and off your bathroom flooring. Allowing water to spill out on a hard surface can lead to mold, mildew, and build-up on the tiles and other flooring surfaces, which can be unhygienic and unattractive.

As all Jaquar shower enclosures are built to conform to the highest safety standards, you can be rest assured that they are completely watertight. This means you won't have to worry about leakages damaging your bathroom floor or ceiling—or worse yet, creating mold and mildew.

 

Elevates your shower experience:

 

A great shower combines many factors - optimum water pressure, apt water temperature, and great aesthetics during and after the shower. After all, who loves to clean the dirty floor just after a relaxing shower? With Jaquar shower enclosures, you can improve your experience by keeping the water within a specific area, so there is no cleaning post your shower. Offering style and function, our shower enclosures make your everyday life easier.

 

Space-effective:

 

Shower enclosures give you more space without sacrificing style. It can be a challenge finding both in today's modern bathroom, but a Jaquar shower enclosure will provide you with both. Unlike big, bulky shower enclosures, Jaquar's shower enclosures come in standard sizes that are good enough to fit any space- from large bathrooms with walk-in closets to bathrooms that need extra storage space. You can also customize the size as per your preference.

 

Ensures safety with impressive safety features:

 

Jaquar shower enclosures are designed with the highest safety standards. They come in different sizes and designs, along with toughened safety glass, high-quality hinges, and locking mechanisms that help keep you safe from injury while allowing you to feel at ease when taking a relaxing shower. A secure enclosure means no chance of slipping on wet bathroom floors.

https://www.jaquar.org.uk/blog/why-shower-enclosure-are-important

 

We had been made aware of that write-up on How to Install a Direct-to-Stud Shower Enclosure through a good friend on a different web property. Loved our write-up? Please share it. Help somebody else find it. Thanks a bunch for your time. Don't hesitate to come by our website back soon.

Secure your plumbing.